Ir a contenido
❤️ Consigue un 10% de descuento a partir de 30€, un 20% de descuento a partir de 60€ y envío gratuito a partir de 39,99€, compra ahora >>
❤️ Consigue un 10% de descuento a partir de 30€, un 20% de descuento a partir de 60€ y envío gratuito a partir de 39,99€, compra ahora >>
Why doesn't the label maker print after installing the label tape?

Why doesn't the label maker print after installing the label tape?

When a label maker doesn't print after installing new label tape, there could be several reasons behind the issue. Here's a checklist of common issues to troubleshoot:

 

Correct Installation: Ensure that the label tape is correctly installed. Many label makers have specific steps for loading the tape, and not following these can lead to printing issues. Refer to the user manual for instructions.

 

Compatible Tape: Make sure the tape is compatible with your label maker model. Using the wrong type or size of tape can prevent the device from printing.

 

Tape Cartridge and Protective Film: Check if the tape cartridge is properly seated within the label maker. Also, some tapes come with a protective film or strip that needs to be removed before installation.

 

Printer Head and Roller Cleanliness: Dirt, dust, or debris on the print head or roller can cause printing issues. To clean the print head, use a cotton swab or, if available, a specialized Print Head Cleaning Cassette designed for this purpose. Similarly, a cotton swab should be employed to gently clean the roller, ensuring both parts are kept in optimal condition for high-quality printing results.

 

Battery or Power Supply: Insufficient power due to low batteries or a faulty power supply can prevent the label maker from printing. Try replacing the batteries or checking the power cord and adapter.

 

Reset the Label Maker: Some label makers may require a reset after installing new tape. Look into the manual for how to reset your specific model.

 

Check for Error Messages: If your label maker has a display screen, check for any error messages that could indicate the nature of the problem, such as tape jam or print head issues.

 

If after going through these steps the issue persists, consulting the user manual for troubleshooting tips specific to your label maker model or contacting the manufacturer's customer support can be helpful. They may provide model-specific advice or indicate if the label maker needs repair.

Artículo anterior Female power, wisdom impression
Artículo siguiente How to Resolve Unrecognized Compatible Toner Cartridges

Dejar un comentario

Los comentarios deben ser aprobados antes de aparecer

* Campos requeridos