Skip to content
❤️ 10% Off Over €30, 20% Off Over €60 & Free Shipping Over €39,99. Shop Now >>
❤️ 10% Off Over €30, 20% Off Over €60 & Free Shipping Over €39,99. Shop Now >>
How to Fix Dry Ink Cartridge

How to Fix Dry Ink Cartridge

Introduction

Nothing is more frustrating than printer problems. Dealing with printer problems can be a major hassle, especially in any busy work environment. One common issue arises when your printer lies unused for extended periods, causing the ink in the ink cartridges to dry out, leading to speckled, faded, and streaky prints. Before you consider discarding that dry cartridge, let's explore some effective ways to fix it.

 

Why do ink cartridges dry out?

Several factors can lead to your ink cartridges drying out, hampering your printing process:

  • Infrequent or irregular printing: Using your printer too infrequently is one of the main causes of dry ink cartridges. If your printer is left idle for a period of time, the ink in the ink cartridges may dry out and clog the nozzles.
  • Poor storage conditions: If stored under improper storage conditions, the ink may dry out if the storage area is too hot or too cold. Unused ink cartridges need to be stored in a cool, dry place away from direct sunlight to prevent them from drying out. Additionally, when cartridges are stored in an upright position, ink begins to settle on the top area of the cartridge, ultimately causing streaky and unclear prints.
  • Ink Cartridge Expiration: Ink cartridges have a shelf life. Post-expiration, they are more likely to dry out. Replace your cartridges every 2 to 3 years, and consider new ones if they've been unused for over 12 months.
  • Manually refill the cartridges: The refilling process needs to be done correctly as it can allow air to enter the cartridges. This will only dry out the ink and clog the nozzle tip.

 

How to fix a dry ink cartridge

When the ink cartridge has a built-in print head

  • Remove the dry ink cartridges from the printer: Open the top cover of the printer, and then carefully remove the dry ink cartridges inside. Be sure to carefully place your hands on the sides of the cartridge to avoid contact with the nozzle.
  • Shake it gently: Shaking it gently may remove some clogs that occur in the cartridge and help the ink disperse properly. This may work if the ink has just dried.
  • Soak in warm water: If you find that the cartridge is still clogged or not working properly, you can try a water bath. Pour a small amount of warm, distilled or filtered water into a shallow dish. Soak the ink cartridge with the nozzle facing down in water. Be careful not to immerse the ink cartridge completely. Just soak half of it (the nozzle side of the cartridge) in warm water and wait 5-10 minutes, or until you notice ink starting to leak from the cartridge into the water. This will indicate that the ink has drained out normally and the blockage has been resolved, please remove the cartridge from the water.
  • pat dry: Place the cartridge back on the table, nozzle side up. Clean the ink cartridge thoroughly with paper towels until it is completely dry. Remember: Do not put wet ink cartridges into the printer, as this may damage the printer.
  • Check: Take a piece of paper and rub the ink nozzles on it to make sure the cartridge is fully functioning. If ink lines appear, it's fixed!
  • Put it back in the printer: After the ink cartridge is clean and dry, put it back in the printer. Do some test prints to check if the printer prints properly.
  • If necessary, repeat the process: Do a test print to see if it effectively repairs the dry ink cartridge. If there are some inconsistencies or errors in the printing, you may need to repeat these steps again. A dry nozzle may not clean completely the first time. So, if necessary, repeat these steps once or twice to see if you get better results.

When the ink cartridge does not have a built-in print head

Run the printer's automatic printhead cleaning feature to release dried ink. Run this function about 3 to 4 times. You can find the exact steps to do this in your specific printer's instruction manual.

 

If you've tried all of the methods listed above and your ink cartridges still aren't printing properly, it may be time to replace them. Especially if the ink has expired or the ink has dried for too long, your only option may be to replace the cartridge entirely.

Previous article What is a Printer Firmware Update and How Do You Deal With It?
Next article 6 Common Problems and Solutions with Compatible Toner Cartridges

Leave a comment

Comments must be approved before appearing

* Required fields